Settable timer times | 0.3 s...1 min |
Current consumption | 50 mA |
Relay output | 1 change-over contact 5 A 12 VAC |
Voltage supply | 12 VDC |
Board size L x W | 77 x 43 mm |
A cyclic timer with relay output for use as a flashing relay, etc. Operating and quiescent time are separately adjustable within the time interval 0.3 seconds to 1 minutes. The timer is activated when voltage is connected to it, and remains activated during the pre-set time. Then a quiescent follows, the length of which has been pre-set. The timer is then reactivated, etc. The adjustment of the activation and pause time is done with two trimmers, 1 MOhm. If the time is going to be changed frequently, the trimmer should be replaced with a potentiometer for panel mounting. The relay is 1-pole switching. Suitable power supply is FE-2 combined with a Semko-approved transformer. The timer has protection against incorrect polarisation of the power supply.