Settable timer times | 1 s...3 min |
Current consumption | 50 mA |
Relay output | 1 change-over contact 5 A 12 VAC |
Voltage supply | 12 VDC |
Board size L x W | 78 x 45 mm |
A timer with relay output. Adjustable time interval between 1 second to 3 minutes. The timer is started with a 1-pole momentary switch. If the cable between the timer and the switch is longer than 100 mm, a shielded cable is recommended. Adjustment of the activation time is done with a 2.2 MOhm trimmer. If the time is frequently going to be changed, it is a good idea to replace this trimmer with a potentiometer for panel mounting. The relay is 1-pole switching, so you can select if it should be switched on or off upon activation. Suitable power supply is FE-2 combined with a Semko-approved transformer. The timer is provided with protection against incorrect polarisation of the power supply.