176-26-644,Oscilloscope 2x100 MHz 1 GS/s, DPO2012B, Tektronix
Datasheet
| Series | DPO2000 |
| Channel analog | 2 |
| Channel digital (MSO) | 0 |
| Bandwidth | 100 MHz |
| Sample rate, single-shot | 1 GS/s |
| Memory | 1000 kpts/ch |
| Display | 7" TFT-LCD |
| Trigger |
Auto
Edge Logic Rise/Fall Time Normal Setup and Hold Single Video CAN (optional) I2C (optional) RS-232/422/485/UART (optional) LIN (optional) SPI (optional) |
| Interfaces |
USB
Ethernet (LAN) (Optional) USB Device (Control and Connect with a PC) VGA |
| Type of measurement | RMS |
| Measuring function |
Automatic parameter measurement
Cursor measuring Duty cycle RPM measurement Serial Triggering and Analysis (optional) |
| Instrument functions |
Automated Search of Waveform Data
Bus decoding (optional) Low-pass filter Probe-Interface Zoom function Bus decoding (optional) |
| Rise time | 3.5 ns |
| Vertical sensitivity/div | 2 mV...5 V/div |
| Time basis | 4 ns...100 s/div |
| Vertical resolution | 8 Bit |
| Electrical supply | 100...240 V @ 50...60 Hz |
| Mathematical functions |
Add
Subtract Multiply FFT |
| Input coupling |
AC
DC GND |
| Input impedance Ohm | 1 MOhm |
| Input: Impedance F | 11.5 pF |
| Dimensions L x W x H | 134 x 377 x 180 mm |
| Weight | 3.6 kg |
| Guarantee | 5 years |
| Delivery with |
1 Probes/channel
Documentation CD Manual Power cable Software Calibration certificate Translated front-panel overlay |
