FLUKE 726 +CAL -

Multifunction process calibrator, FLUKE 726 +CAL, Fluke

声明：图片仅供参考，请以实物为准！

订购热线： 400-900-3095 0755-21000796, QQ:800152669, Email:sales@szcwdz.com

由于产品数据库庞大，部分产品信息可能未能及时更新，下单前请与销售人员确认好实时在库数量，谢谢合作！

Instrument for	Current Frequency Pressure RTD Resistance Thermoelements Voltage
Calibration	Calibration

ADC max.	24 mA
VDC max.	30 VDC
Ohm max.	4000 Ohm
Max. temperature	+1750 °C
Min. Temperature	-200 °C
Measuring function	Current, apply/simulate Frequency, apply/simulate Pressure, apply/simulate Resistance, apply/simulate Voltage, apply/simulate
Hz max.	15 kHz
Description	Precision Multifunction Process Calibrator
Sensor type/thermocouples	J K T E R S B M L U N XK BP Cu10 Ni120 PT100 PT200 PT500 PT1000
ADC resolution	1 μA
VDC resolution	0.01 mV
Ohm resolution	0.01 Ohm
°C resolution	0.01 °C
Hz resolution	1 Hz
Display	LCD Backlit
Electrical supply	4 x LR6/AA
Dimensions L x W x H	200 x 96 x 47 mm
Weight	850 g

Measure and source volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Two separate channels; measure, source and view process signals simultaneously
Measure pressure using any of 29 Fluke 700Pxx Pressure Modules (for pressure sourcing external pump required)
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Precise measurement and calibration source performance, accuracy of 0.01% in Range 4...20 mA
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Store frequently-used test setups for later use
Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
HART mode inserts 250 Ohm resistor in mA measure and source for compatibility with HART instrumentation

Country of origin United States (US)

Manufacturer Fluke

Gross weight (incl. package) 1225.0 Gram

Dimensions (incl. package) 255 x 200 x 85 MM

Customs number 9030333090

UNSPSC (v5.03) 41113630

EAN 95969293273