300-88-391,Laboratory Power Supply 1 Ch. 0...20 VDC 10 A, Programmable, PSP-2010, GW Instek
Datasheet
| Outputs | 1 |
| Power | 200 W |
| Output voltage 1 max. | 20 VDC |
| Output current 1 max. | 10 A |
| Programmable | Programmable |
| Interfaces | RS232 |
| Resolution, voltage | 10 mV |
| Resolution, current | 5 mA |
| Length | 305 mm |
| Input voltage | 230 VAC |
| Dimensions L x W x H | 305 x 225 x 100 mm |
| Weight | 4.0 kg |
Programmable laboratory power supply with output voltage, 0 to 40 V, and current, 0 to 5 A (PSP-405) or 0 to 20 V and 0 to 10 A (PSP-2010). Adjustable for constant voltage or constant current. Apart from adjustable current limit, an upper voltage and power output limit can be set. All settings are carried out by push-buttons and encoder knobs or via an RS232-port. Both up-to-date values and limit values are displayed on the LCD. A function for percentage change of value; with the push of a button, the output voltage can quickly be increased or decreased with a pre-set percentage rate. The key pad can be locked to prevent unintentional change. The output has a separate breaker switch and is protected against over-voltage. The power supply is over-voltage protected, short-circuit proof and protected against overheating.
